etrailer | Feature Breakdown: Valterra Bladex Waste Valve Body for RV Holding Tank
Click for more info and reviews of this Valterra RV Waste Valves:
https://www.etrailer.com/RV-Waste-Val...
Check out some similar RV Waste Valves options:
https://www.etrailer.com/dept-pg-RV_W...
https://www.etrailer.com
Don’t forget to subscribe!
/ etrailertv
Full transcript: https://www.etrailer.com/tv-Demo-Valt...
Today we'll to take a look at the Valterra 2" Bladex Waste Valve with the plastic handle. Now this Valterra Bladex 2" Waste Valve body comes with a nice stainless steel shaft. Has a plastic handle on the top. Now this handle is threaded, so it is made for easy replacement if it gets broken. The seals it comes with, chemically resistant seals. It is designed to fit the Bladex, the Valterra, the Bristol and the Anonda valves.
It includes everything shown here on the table. The waste valve, the two seals, the bolts and the nuts. So basically when you go to install this you just remove your own valve in your seal and then you place these new seals over the lip of your existing flange fittings, insert the new valve. You want to make sure you don't dislodge the seals. Once you get it in there, put your bolts and nuts in there and tighten it down.
You're all ready to do. Now when you pull your handle you can see it opens and then closes it. But that should do it on the review of the Valterra 2" Bladex Waste Valve with the plastic handle.
