Restoration Rusty Knife
Hi! Today, the restoration of very rusty objects. Maybe it's a knife!? They may have been lying underground for more than 100 years, but I want to share with you new techniques and, most importantly, how to restore such items. Let's start the restoration!
The first thing I did was try to remove the thick layers of rust, then I put the items in the rust remover.
The next step is cleaning the petrified rust with sand, then with an iron brush and after manual processing.
After finishing the cleaning, I coated the surface of the knife with nickel. For the handle, I made overlays of leather and wood with new pins made of hard plastic.
I cut off the sheath of the knife (the metal became paper thin), glued it with tape and filled the sheath with liquid gypsum. After drying the gypsum, I plastered the surface of the scabbard twice and covered it with paint.
I re-soldered the scabbard suspension with silver. I made a new piece of hardware (quickly). At the end, I processed the handle of the knife and showed you a small test.
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: / screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: / scresandtools
Instagram: / screwsandtools
#screwsandtools #knife #restoration
