How to Replace Variable Valve Timing Solenoid (VVT) 2008-2012 Honda Accord 2.4L
Buy Now!
New Variable Valve Timing Solenoid from 1AAuto.com https://trq.video/ia-1AZMX00467
This video shows you how to install a variable valve timing solenoid (VVT) on your 2008-2012 Honda Accord (2.4L). If the variable valve timing solenoid in your vehicle is stuck or clogged, causing your engine to not run properly, you may notice reduced fuel efficiency, sputtering, rough running or stalling in your engine. Solenoids usually need to be replaced once they begin to fail.
This repair was done on a 2010 Honda Accord LX-S 2.4L Coupe 2-Door FWD Manual and the process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord
Tools you will need:
• 10mm Deep Socket
• 10mm Socket https://trq.video/oaoB-1AXAA00017
• Bent Nose Pliers
• 3/8 Inch Drive Ratchet https://trq.video/oazU-1AXAA00015
• Engine Oil
Subscribe: / @trq
Check out our playlist:
Honda Accord 2008-12 8th Gen: • Honda Accord 2008-12 8th Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
