How to Replace Brake Master Cylinder 2013-2019 Ford Escape
Buy Now!
New Brake Master Cylinder from 1AAuto.com https://trq.video/ia-ACBMC00043
This video shows you how to install a new master brake cylinder in your 2013-2019 Ford Escape. The brake master cylinder and fluid reservoir deliver the fluid and pressure needed to actuate your brake calipers or wheel cylinders. If your master cylinder is leaking or damaged, you need to replace it to ensure safe brake operation.
Estimated installation time for a professional technician is approximately: 2 hours 42 minutes
This repair was done on a 2013 Ford Escape Titanium 2.0L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2013 Ford Escape
2014 Ford Escape
2015 Ford Escape
2016 Ford Escape
2017 Ford Escape
2018 Ford Escape
2019 Ford Escape
Tools you will need:
• 15mm Wrench https://trq.video/oanc-1AXAA00010
• 10mm Socket https://trq.video/obWi-1AXAA00017
• 13mm Socket https://trq.video/ocqo-1AXAA00015
• 15mm Socket https://trq.video/ocqo-1AXAA00015
• 7mm Socket https://trq.video/obWi-1AXAA00017
• 8mm Socket https://trq.video/obWi-1AXAA00017
• Trim Tool Set https://trq.video/oaGL-1AXXX00006
• T20 Socket
• T25 Torx Socket
• Ratchet https://trq.video/ocp5-1AXAA00016
• Torque Wrench https://trq.video/obrB-1AXAA00044
• Block of Wood
• Brake Parts Cleaner
• Cloth Rags https://trq.video/oVb-1AXSS00035
• Gloves https://trq.video/obzf-1AXSS00048
• Safety Glasses
• Drain Pan
• Floor Jack https://trq.video/oaKs-1AXAA00068
• Jack Stands https://trq.video/oawV-1AXAA00065
• Pick https://trq.video/oaag-1AXAA00037
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Ford Escape 3rd Generation 2013-2019: • Ford Escape 3rd Generation 2013-2019
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
