How to Replace Power Steering Cooler Return Hose 1998-2002 Lincoln Navigator
Buy Now!
New Power Steering Return Line Hose Assembly from 1AAuto.com http://1aau.to/ia/1ASPP00490
This video shows you how to install a power steering cooler return hose on your 1998-2002 Lincoln Navigator.
This process should be similar on the following vehicles:
1998 Lincoln Navigator
1999 Lincoln Navigator
2000 Lincoln Navigator
2001 Lincoln Navigator
2002 Lincoln Navigator
Tools you will need:
• Pry Bar http://1aau.to/oQv/1AXAA00020
• 16mm Wrench
• 13mm Socket http://1aau.to/obmi/1AXAA00015
• Hose Clamp Pliers http://1aau.to/ofh/1AXAA00076
• Needle nose pliers http://1aau.to/oBK/1AXAA00051
• Needle nose pliers http://1aau.to/oBK/1AXAA00052
• Cloth Rags http://1aau.to/oAM/1AXSS00035
• Fluid Transfer Pump http://1aau.to/oP/1AXAA00152
• Silicone Paste
• Transmission Fluid
• Bucket
• Drain Pan http://1aau.to/oxz/1AXAA00320
• Funnel http://1aau.to/ohw/1AXAA00310
• Pick http://1aau.to/oLy/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
