How to Replace Rear Forward Lower Control Arms 2013-2019 Ford Escape
Buy Now!
New Control Arm Set from 1AAuto.com https://trq.video/ia-1ASFK11072
New Control Arm from 1AAuto.com https://trq.video/ia-1ASRL00123
This video shows you how to install new control arms in your 2013-2019 Ford Escape. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.
Estimated installation time for a professional technician is approximately: 1 hour 12 minutes
This repair was done on a 2013 Ford Escape Titanium 2.0L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2013 Ford Escape
2014 Ford Escape
2015 Ford Escape
2016 Ford Escape
2017 Ford Escape
2018 Ford Escape
2019 Ford Escape
Tools you will need:
• Pry Bar https://trq.video/oafm-1AXAA00020
• 12mm Wrench https://trq.video/oane-1AXAA00010
• 15mm Socket https://trq.video/ocqq-1AXAA00015
• 19mm Socket
• T60 Torx Socket
• Ratchet https://trq.video/ocp7-1AXAA00016
• Socket Extensions https://trq.video/ocqq-1AXAA00015
• Torque Wrench https://trq.video/obrD-1AXAA00044
• Gloves https://trq.video/obzi-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oaKt-1AXAA00068
• Jack Stands https://trq.video/oawW-1AXAA00065
• Pole Jack
• Rubber Mallet
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Ford Escape 3rd Generation 2013-2019: • Ford Escape 3rd Generation 2013-2019
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
