Use Manpower To Carry Up The Reinforcement Cage For Slope Protection Frame Beam Construction !
The Slope Protection Frame Beam Is A Structure Used For Slope Protection !
The slope protection frame beam is usually made of reinforced concrete. Its main function is to enhance the stability of the slope and prevent slope collapse and soil erosion. It is generally in a frame shape and consists of cross beams and longitudinal beams, forming a grid-like structure !
There Are Several Benefits Of Setting Up Slope Protection Frame Beams On Slopes :
1. Provide Support
The frame beam can provide support to the slope soil, limit the deformation and sliding of the soil, and increase the overall stability of the Slope !
2. Disperse Pressure
Disperse the earth pressure on the slope to each frame beam unit to reduce local pressure and lower the risk of slope in stability !
3. Prevent Soil Erosion
The frame beam can effectively intercept the scouring of rainwater and surface water, reduce soil erosion and protect the slope surface !
4. Vegetation Restoration
The grid structure of the frame beam can provide space for the growth of vegetation. By planting vegetation, the stability of the slope can be further enhanced while beautifying the environment !
The design and construction of slope protection frame beams need to be carried out according to the specific slope conditions, including factors such as the slope gradient, soil quality, and height. During the construction process, it is necessary to ensure the quality and stability of the frame beam to achieve a good slope protection effect !
In The Construction Of Slope Protection Frame Beams, The Reinforcement Cage Can Be Installed In The Following Ways :
I. Crane Hoisting
If there are large equipment such as cranes at the construction site, cranes can be used for Hoisting !
1. First, make the reinforcement cage on the ground and ensure that its size and quality meet the design requirements !
2. Then, hang the lifting point of the reinforcement cage with the hook of the crane and slowly lift it to the installation position of the slope protection frame Beam !
3. During the hoisting process, keep the reinforcement cage stable, avoid shaking and collision, and prevent the reinforcement cage from de forming !
4. When the reinforcement cage reaches the installation position, it is adjusted and fixed by construction personnel to ensure that its position is accurate !
II. Manual Handling And Installation
In some small construction sites or where cranes cannot reach, the method of manual handling and installation can be adopted !
1. Also make the reinforcement cage on the ground first !
2. Organize enough construction personnel to carry the reinforcement cage in sections or blocks. Pay attention to coordinated cooperation during the handling process to avoid safety accidents !
3. After carrying the reinforcement cage to the position of the slope protection frame beam, gradually assemble and install it in place by manpower. Tools such as crowbars and ropes can be used to assist in adjusting the position of the reinforcement Cage !
4. After the installation is completed, fix the reinforcement cage to ensure that it will not move during the subsequent construction process !
III. Using Simple Lifting Equipment
If there is no crane, some simple lifting equipment such as manual hoists and winches can also be made !
1. Install simple lifting equipment and ensure that it is firm and reliable !
2. Connect the reinforcement cage with the lifting Equipment !
3. Slowly lift the reinforcement cage to the installation position by operating the lifting Equipment !
4. Construction personnel should cooperate closely during the installation process to ensure the installation quality of the reinforcement Cage !
