Use The Hydraulic Displacing Cylinder Tool To Move The Body For The Oncoming Semi-Trailer To Pass !
When Two Trailers Meet, Use The Hydraulic Displacement Cylinder Tool To Move The Body For The Oncoming Semi-Trailer To Pass !
The displacement jack for side-tipping semi-trailers usually refers to the hydraulic displacement cylinder, which is one of the standard configurations of side-tipping Semi-trailer !
Its main function is to help the vehicle move out from a specific position after unloading, making it more convenient and fast. In the empty vehicle state, this displacement jack can be used to jack up the vehicle to achieve displacement operation. However, if it is used in the loaded vehicle state, it is very likely to damage the vehicle frame because the weight of the loaded vehicle far exceeds the bearing capacity range of the displacement Jack !
How to use the displacement jack for side-tipping Semi-trailer properly !
You can follow these steps:
I. Check The Equipment
1. Before use, check whether the displacement jack (hydraulic displacement cylinder) is damaged or leaking oil to ensure it is in good working Condition !
2. Check the overall condition of the semi-trailer, especially key parts such as the vehicle frame, to ensure there are no potential damages that affect the displacement operation !
II. Choose The Right Time
1. It is best to use the displacement jack after the side-tipping semi-trailer has unloaded. At this time, the vehicle is in an empty state, which can minimize the risk of damage to the Vehicle !
III. Operating Steps
1. Park the semi-trailer on a flat and solid ground, and ensure the surrounding environment is safe and there are no obstacles affecting the operation !
2. Find the operating position of the displacement jack. Usually, there will be control valves or switches !
3. Slowly operate the control device to make the hydraulic displacement cylinder start working and gradually jack up the carriage. During the operation, pay attention to observing the rising situation of the carriage to ensure a smooth rise and avoid tilting or unstable situations !
4. When the carriage moves to the required position, slowly release the hydraulic pressure to make the carriage fall smoothly !
IV. Precautions
1. It is strictly prohibited to use the displacement jack when the vehicle is loaded. Otherwise, important parts such as the vehicle frame may be damaged !
2. Be careful and cautious during the operation to avoid personal injury or equipment damage due to improper operation !
3. Regularly maintain the displacement jack to ensure its stable performance and prolong its service life !
