3D print in place moving parts ** Chapter 4 ** Fusion360 Tutorial 2019
In this chapter, we will be Designing the 3D print in place moving head & door for the robot in Autodesk Fusion360. The way we achieve this, is by designing the head & the door as separate pieces with enough gaps between them & the rest of the body of the model. To be able to get this working, you need to make sure that your 3d printer is well calibrated & the extrusion multiplier in the slicer is tuned, as well as the stepper motor of your 3d printer. A fault in any of these would result in a print , which wont have the parts moving & would get stuck with the rest of the body of the model once its 3D printed.
Download the head reference from this link : https://tinyurl.com/yxozpsm4
*************************************************************************************
Have an idea for a tutorial? Please don't hesitate to post it in comments below.
Thank you for watching, and enjoy!
*******************************************************************************
Subscribe + Rate + Comment and Share (As you know ,Sharing is caring..!!)
*******************************************************************************
You can connect with me on the Socials at the handles below:
Instagram : @tar1qali
Twitter : @3dguydubai
Facebook : @3dprintinggeek / @3dguydubai
www.3dprintinggeek.net
[email protected]
#3dprinting #3dprintinggeek #3dprinted #Fusion360 #tar1qali #Tutorial #FoldingRobot
