Belkin RT3200 web admin Interface and more
A detailed video showing the Belkin RT3200 router, ports, sockets, switches, lights and power supply. (Also known as a Linksys E8450 but the admin interface may be different? Let me know if you have one!.)
Also every page of the web admin configuration web page interface! See the bookmarks below for each area of the system.
Chapters:
00:00 Intro
02:01 What comes in the box.
02:37 What the power supply looks like and its ratings.
03:20 Quick scan through of the manual / quick start guide.
04:34 The front of the router.
04:45 The back of the router showing the WPS and Reset buttons, 4 LAN ports, 1 WAN port, USB port, power socket and on / off switch.
05:22 The labels on the bottom of the router.
06:53 Plugging the router in, boot up time and power consumption.
10:00 Logging in to the router admin web interface page with the default IP address.
10:30 The initial setup wizard.
13:00 Logging back in to the router after the initial setup.
13:05 Router Status Page showing Firmware Version, Current Time, IPv4 and IPv6 addresses and WAN status.
13:45 Local Network status showing LAN IP and DHCP information including client list.
14:05 Wireless Status Page showing very little helpful information (doesn't show the current channel or bandwidth!).
14:20 LAN and WAN port status screen.
15:06 Loocal Network configuration page for LAN IP, Subnet Mask and DHCP server settings and static reservations.
17:13 WAN setup for Dynamic, Static IP, PPPoE, PPTP, L2TP, Bridge Mode or Wireless Bridge. (MTU)
20:00 VLAN settings / setup for WAN and LAN 3 + LAN 4.
20:27 IPv6 Settings.
20:48 MAC Address Cloning / spoofing.
21:05 Advanced Routing / Static Routes, enable or disable NAT and RIP (Dynamic Routing).
22:09 Wi-Fi settings, Name, Channel, Channel Width etc.
23:23 WiFi WPS button settings and WPS PIN.
23:40 Wi-Fi password / WPA settings.
23:50 Guest Wireless settings.
24:33 Wireless MAC Address Filtering.
24:55 WiFi Advanced Settings (Beamforming and MU-MIMO).
25:07 Security, Firewall: Enable WAN Ping request and enable/disable firewall.
25:32 DMZ Settings.
26:17 DDNS / Dynamic DNS (dyndns and no-ip).
26:30 VPN Passthrough options (IPSec, PPTP, L2TP)
26:39 IPv6 Firewall settings.
26:43 QoS / Bandwidth limiting settings.
29:16 Single Port Forwarding settings.
29:38 Range Port Forwarding settings.
30:08 Port Range Triggering (whatever that is!).
30:39 External Storage (USB Storage or drive access via SMB or FTP).
31:39 Language settings.
31:55 Set / change the admin password.
31:59 Time Zone settings.
32:07 Management settings (external remote access to the web admin interface).
32:41 "Gateway Function" (settings for SIP ALG Application Layer Gateway and UPnP Universal Plug and Play).
33:35 Backup and restore settings.
33:51 Factory Reset or reboot the router via the admin interface.
33:59 Firmware Upgrade page.
34:06 Parental Controls
35:39 Troubleshooting Logs settings and access. (Security Log and DHCP Clients log).
36:10 Ping and Traceroute from the router.
How to factory reset the router: • How to factory reset a Belkin RT3200 ...
How to install OpenWRT custom firmware onto the router: • How to install OpenWRT on Belkin RT32...
