How to Replace Front ABS Sensor 2009-2014 Ford F-150

Опубликовано: 26 Декабрь 2024
на канале: TRQ

29,548

227

Buy Now!
New ABS Wheel Speed Sensor Set from 1AAuto.com https://trq.video/ib-1ABCK00547
New ABS Wheel Speed Sensor from 1AAuto.com https://trq.video/ia-1ABES00564

This video shows you how to install a new ABS wheel speed sensor for your 2009-2014 Ford F-150. ABS wheel speed sensors are critical to the operation of your vehicle's ABS and ESC systems, which use real time wheel speed data to ensure your vehicle stays safe and on the road. These magnetic sensors are sensitive and susceptible to damage, which would require replacing them.

This repair was done on a 2009 Ford F-150 Lariat 5.4L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150

Tools you will need:
• 18mm Socket
• 22mm Socket https://trq.video/ooq-1AXAA00266
• 1/2 Inch Impact Gun https://trq.video/osZ-1AXAA00252
• Ratchet https://trq.video/obAT-1AXAA00016
• Torque Wrench https://trq.video/oaEI-1AXAA00044
• Copper Anti-Seize
• 5mm Hex Wrench
• Floor Jack https://trq.video/o5s-1AXAA00068
• Jack Stands https://trq.video/oTB-1AXAA00065
• Wheel Chocks

Subscribe: / @trq

Check out our playlist:
Ford F150 2009-2014 12th Gen: • Ford F150 2009-2014 12th Gen

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.