MAKE YOUR OWN LI-ION BATTERY CHARGER!! - EASY BUILD!!

Опубликовано: 11 Апрель 2025
на канале: EHobby Guy

11,974

164

In today's video we build a fully functional Lithium Ion Battery Charger that has the built in feature of an audio buzzer that sounds when charging is complete. We go over the complete schematic and the mechanical build from start to finish. Hope you enjoyed it. All comments are appreciated. Thanks for watching.

IMPORTANT !!!
THE SCHEMATIC IN THE VIDEO IS SLIGHTLY WRONG. THE CORRECT SCHEMATIC IS LINKED BELOW !! SORRY !

Here is the Parts list: (This list is also in the schematic download below!
Qty Description
2 TP4056 Charging Modules
1 Active Buzzer
1 100mm x 60mm x 25mm Project Box
2 Li-Ion Battery Holders
2 3mm Red LEDs
2 3mm Blue LEDs
2 IRF9540 P Channel MOSFETs
2 10KOhm Resistors 1/4W or higher
2 On/Off Swithes, I used 1 DPDT for both
Li-Ion Batteries

Here is a link to the schematic:
https://drive.google.com/open?id=0B3C...

Here is my last video !!
   • ARDUINO DATA RECORD ONTO SD CARD - ST...

Social Media:
Website: http://ehobbyguy.com
facebook:   / paulyourehobbyguy
Twitter:   / ehobbyguy
Instagram:   / ehobbyguy

Subscribe !!!
   / @ehobbyguy8980