How to glue the linoleum with your own hands. Welding linoleuma
How to glue the linoleum with your own jack. Cold welding of linoleum. Despite the new floor coverings that appear in the last decade, Linoleum still remains popular. Ok when the area of the room allows you to put one piece, but if for some reason it is impossible arises the problem of connecting the joints. Let's figure out how to glue the linoleum jack. It is often possible to connect such methods to connect the edges of the linoleum: fastening using bilateral scotch. The way is simple, cheap and easy to perform. The reverse side of the edges of the linoleum is glued with a band of two-way tape. Gradually, removing the protective strip from the opposite side of the scotch, stick both strips to the base of the floor. Unfortunately, the connection is unreliable and the locations of the docking of individual sheets are visible. Pressing the seam by a spawning. This method is convenient to apply at the junction of the rooms. It is easy to perform and gives a reliable connection. The threshings are produced from different materials. They can have different sizes. Unfortunately, the color range of such thorns is small. In addition, such a threshold is slightly higher than the floor level, which can create certain inconveniences. Hot welding of linoleum. The connection of linoleum hot welding requires a special tool. This method can be applied to industrial linoleum welding, but not suitable for household class. With hot welding, a temperature of 4000 ° C is achieved, and the household linoleum just starts to melt and deform. Cold welding of linoleum. When using this technique, the linoleum junctions are glued with a special glue. This is the perfect ratio of simplicity, low prices and reliability of the connection. As you can see, each of these ways has its advantages and disadvantages. The simplest and however, the reliable method is cold welding of linoleum edges.
