Removing the lower moldings, door handles and gas tank cover Audi A6 C6
A known problem with Audi A6C6 is corrosion under the lower moldings. In the early versions (2004-2007), moldings were attached to metal profiles that rot in the dust. In my 2008 Audi, the moldings are attached to plastic guides, but the doors still rot due to a large accumulation of dirt, so be sure to clean.
To remove the lower stickers of the door mouldings, be sure to Unscrew the 2 screws on the Torx T20, then pull the molding back towards the rear bumper.
=======================
To cover it, you must also remove the door handle and the gas tank cover for the selection of paint.
Door handles on audi a6c6 are removed quite easily, be sure to press the lock under the handle and move the handle forward.
=======================
Articles:
4F0853959KGRU-left front door molding 4F0853959JGRU 4F0853959B
4F0853960KGRU-front straight door molding 4F0853960JGRU 4F0853960K
4F0853969KGRU-left rear door molding 4F0853969L 4F0853969B 4F0853969B 4f0853969lgru
4F0853970KGRU-rear straight door molding 4F0853970L 4F0853970B 4F0853970C 4F0853970S 4F0853970LGRU
=======================
My blog on Drive2 https://www.drive2.com/users/mark47/
