Battery replacement Audi A6 C7 and adaptation with vag-com cable
To replace the #Audi #A6C7 #battery, you will need the following tool: keys or end heads for 10 and 13, a vag-com diagnostic cable to adaptation a new battery (not required, but recommended)
To adaptation the new battery, you will need to go to the 19 block Diagnostic interface of data buses (CAN Gateway) - in the Adaptation section - in 3 oprions, you can make changes to "Serial number", "Manufacturer", "Size"
Manufacturer Codes:
MLA - Moll
VAO — Varta
JCB — JCI/JCB
TU3 — Exide
5DO — JFF/Boading
BA2 — Banner
You choose the nearest battery size, in fact I have a 74Ah battery, but this value is not in the list, so I chose 72Ah
The serial number of the battery is entered either from a sticker on the battery, or random numbers.
====================
Article original battery for Audi A6C7 2.0 TFSI VAG 000915105CC (68Ah)
000915105DG (72Ah)
000915105CD (75Ah)
000915105DH (80Ah)
000915105CE (92Ah)
000915105DK (95Ah)
000915105CF (105Ah)
000915105DL (110Ah)
====================
Timecodes:
0:00 Start
1:25 Battery check
2:53 Voltage when the engine is running
4:40 Removing and replacing the battery
7:37 Battery adaptation in vag-com
10:37 Results
====================
My blog on Drive2 https://www.drive2.com/users/mark47/
