DIY Shou-sugi-ban !! Firing brushing, cool finish white with gray/Wood Burning
In this video, I will show how to make a cool finish at home without using a spray gun and complex paints and varnishes!
My Instagram / woodhouse5007
ATTENTION!!! Firing should be carried out in a strictly designated place in compliance with safety regulations !!!
In detail:
Stage 1: Firing. I used a conventional gas torch with a diffused torch
It is necessary not to burn the places of gluing together from above and at the ends, otherwise there will be very strong shrinkage and the product can be damaged.
Stage 2: We thoroughly clean the burned fibers with a metal brush and carefully blow
Stage 3: Apply a white acrylic enamel with a brush, you can use any company
Stage 4: After the first layer has dried, apply the second and immediately remove the top layer with a spatula
5. After complete drying, apply the oil, I used Osmo with white pigment, because it does not give yellowness on a white background. You can use acrylic lacquer, it also works great
