I built an ergonomic columnar split keyboard: build process review

Опубликовано: 14 Ноябрь 2024
на канале: glich.stream

8,749

200

This is a documentation of my journey building the Aurora Sofle v2 rev1 from splitkb. This is a great guide for beginner keyboard builders, you'll be able to see the build process end to end and the things you need to pay attention to.

▬▬▬▬▬▬ Resources & References 📕 ▬▬▬▬▬▬

splitkb: https://splitkb.com/

▬▬▬▬▬▬ Chapters 🕐 ▬▬▬▬▬▬

00:00 - Intro
01:37 - Unboxing
03:36 - Soldering the 1N4148 TH signal diodes
04:56 - Soldering technique tips
06:19 - Mistake 1: Not using SMD diodes instead of through-hole
07:28 - Soldering the per-key RGB LEDs
08:34 - Preparing the microcontroller
10:02 - Mistake 2: Not socketing your microcontroller
10:59 - Flashing the microcontroller
12:47 - Soldering the Kailh low profile Choc switches
16:37 - Installing the OLED displays
16:43 - First keyboard run!
17:26 - Troubleshooting keyboard short circuits
21:51 - My thoughts on the keyboard building process
22:18 - Time spent building the keyboard
22:34 - Equipment needed
23:12 - Cost breakdown of the kit and components
23:46 - Experience with electronics
25:00 - Conclusion

▬▬▬▬▬▬ Connect with me 👋 ▬▬▬▬▬▬

Twitter:   / bassemdy
GitHub: https://github.com/link-
LinkedIn:   / bassemdghaidy
Facebook:   / bassemdy
Blog: https://blog.bassemdy.com

▬▬▬▬▬▬ Support the channel 💜 ▬▬▬▬▬▬

Every little bit helps ✨
Become a member of the channel: https://glich.stream/yt_members
Get access to Patreon exclusive perks: https://glich.stream/patreon
1 time support: https://glich.stream/coffee_shop

#glichstream #softwareengineering #programming #coding #keyboards