Patriot Energy Oil and Gas Rig Setup

Опубликовано: 17 Октябрь 2024
на канале: Patriot Energy & Royalties

20,864

Watch in less than 2 minutes what takes about 18 hours to complete: Setting up an oil and gas rig. Call Patriot Energy today at (469) 269-5414 and speak to one of our consultants about how you can be a part of oil and gas investments, or contact us online at http://www.patriotenergy.com/contact

Video transcript:

So how does an oil drilling rig get started anyway?

Here’s the process.

First….after the pad site has been cleared….about an acre…and the mud pit dug out, they drill a six foot square hole and install a 2x12 wooden frame for support.

At the same time, they line the mud pit with a plastic seal. This keeps all the drilling mud contained.

Next, a small drilling rig puts the first bit in the ground in that 6x6 hole….and proceeds to stir up a total….dusty…mess.

This hole is drilled to 40 feet, then re-drilled with a wider bit …. and then the first section of casing is lowered into the hole and cemented in place.

To view the full transcript, visit http://www.patriotenergy.com/media/pa...

Call Patriot Energy today at (469) 269-5414 and speak to one of our consultants about how you can be a part of oil and gas investments, or contact us online at http://www.patriotenergy.com/contact