Control 6 Servo Motors With This Arduino Project

Опубликовано: 16 Октябрь 2024
на канале: THE ELECTRONIC GUY

1,093

In this video, I'll show you how to build a DIY servo tester with 6 channels using an Arduino Nano. You can control up to 6 servo motors independently using it.
There are two modes for using this controller: Manual/Potentiometer and Auto/0 degree mode. In manual mode, the servo position is controlled by the potentiometer rotation, and in Auto mode, on pressing the button, the servo gets back to the 0-degree position.

Whether you're a hobbyist or a robotics enthusiast, this project will help you gain control over your servo motors with a custom-built servo controller.

I’ll guide you through the components, wiring, and coding required to create a fully functional servo tester at a fraction of the cost.

Circuit diagram and program:
https://www.etechnophiles.com/6-chann...
TinkerCad file:
https://www.tinkercad.com/things/48ZP...

-----------------------------------------------------------------------------------------------------------------
Chapters:
00:00 Intro
00:33 Tinkercad Simulation
02:11 Prototype Circuit on Breadboard
03:01 PCB Assembly
03:55 Testing the Board
04:42 Outro