Fiber Gate Router Configuration in PPPoE Model FG-714GXW
Fiber Gate Router Configuration in PPPoE Model FG-714GXW
Configuring your Fiber Gate router in PPPoE (Point-to-Point Protocol over Ethernet) mode is crucial for establishing a reliable and secure internet connection. Follow these steps to configure your FG-714GXW router for PPPoE:
Step 1: Access Router Interface: Connect your computer to the router either via Ethernet cable or Wi-Fi. Open a web browser and enter the router's IP address in the address bar (commonly 192.168.1.1) to access the router's web interface.
Step 2: Login Credentials: Enter the router's username and password when prompted. Default credentials are often "admin" for both username and password. If you've changed them before, use the updated login details.
Step 3: Navigate to WAN Settings: Once logged in, locate the WAN settings section within the router's interface. This might be under the "Network Setup" or "Internet" tab, depending on the router's firmware.
Step 4: Choose PPPoE Mode: Within the WAN settings, select PPPoE as the connection type. This option might be labeled as "PPPoE" or "DSL" depending on the router's interface.
Step 5: Enter PPPoE Credentials: Enter the PPPoE username and password provided by your internet service provider (ISP). These credentials are essential for establishing the PPPoE connection.
Step 6: Save and Apply Changes: After entering the PPPoE credentials, save the settings and apply changes. The router will now attempt to establish a PPPoE connection using the provided credentials.
Step 7: Reboot Router (if necessary): In some cases, rebooting the router might be necessary for the changes to take effect. Follow the router's interface instructions to reboot if required.
Once the configuration is complete, your Fiber Gate router FG-714GXW should be successfully configured for PPPoE mode, enabling you to enjoy a stable internet connection.
