Install OpenWrt 23 on Banana Pi R2 PRO & PPPoE Speedtest
In this video, I will show you how to install the latest OpenWrt version on the Banana Pi R2 PRO internal eMMC. (OpenWrt 23.02 snapshot). After that, let's check out the PPPoE throughput with VLAN (packet steering on).
OpenWrt 21.02 firmware provided by Banana Pi is out of date and there are problems with DSA, for example VLAN is not working fine. Fortunately, mj22226 and other developers are maintaining an up-to-date OpenWrt version which can be used for the BPI-R2-PRO and other SBC with Rockchip SoC, such as the NanoPi R4S, Rock Pi 4, etc. In this video, I will use OpenWrt from him.
You can check out the guide at: https://vantc.net/install-openwrt-23-...
Video timeframe:
00:00 - Intro
00:35 - OpenWrt firmware from mj2226 (Marty Jones)
01:21 - Create microSD card to boot OpenWrt
01:35 - Boot OpenWrt on microSD card with MASKROOM button
02:04 - Flash OpenWrt to the internal eMMC storage
02:34 - Boot OpenWrt from internal eMMC storage
02:52 - Install the latest OpenWrt firmware for the BPI-R2-PRO
03:29 - Test Overview
03:49 - PPPoE with VLAN - Speedtest - SW Offloading Enabled
04:17 - PPPoE with VLAN - Speedtest - SW Offloading Disabled
BPI R2 PRO Wiki - https://wiki.banana-pi.org/Getting_St...
Thanks for watching and see you again!
