Configuring Basic Router Security Settings in Cisco || fyp project
If you have any question ping me on WhatsApp +92 343 9293686
Configuring Basic Router Security Settings (16 Marks)
For the given network topology, you are asked to develop necessary security configurations.
1. Configure a minimum password length of 6 on all routers
2. Configure an encrypted enable password on Branch Router1 and Branch Router 2. Use your HCT ID as enable password
3. Configure console password on the Branch Router1 and Branch Router 2. Use your firstname as the password. Set the timeout for console login as 5 minutes.
4. Encrypt all the passwords in the router.
5. Block the login for 120 seconds for 3 failed attempts within 60 seconds.
6. Configure OSPF Authentication between Core Router and Edge Router. Use your HCT ID as your password.
7. Configure routers BranchRouter1, Branch Router2, Core Router and Edge Router as NTP clients. Verify the clock on all the routers.
8. Configure the core router to log messages to the Syslog Server. Log all successful and failure login messages. Verify the log messages.
Configuring SSH (10 Marks)
9. Configure SSH on Core Router.
Host Name
HeadOffice
Domain Name
hct.com
Timeout
30
SSH Client user name
root
SSH Client Password
your last name
SSH Version
2
Authentication Retry
3
Verify the SSH connection from PC to the core router.
Configuring AAA Server (6 Marks)
10. Configure Server-Based AAA Authentication using RADIUS on Edge Router (5 Marks)
Configure RADIUS SERVER based authentication on CoreRouter.
Configure AAA login authentication for telnet access on Edge Router. Create a local username and password as a backup in the Edge Router.
Verify the Telnet access on the Edge Router.
