3D Printed Piper CUB Model Airplane (107cm). Print, Build, Paint, Fly, Have Fun. Free Build.

Опубликовано: 29 Сентябрь 2024
на канале: KendinYap

141,059

3Dlabprint Piper Cub RC model airplane making. Printed with LW-PLA (Light Weight) filament.
A great RC model, flying very stable.

* 1 x Motor: 2212 980KV Motor: https://s.click.aliexpress.com/e/_Dlo... OR https://tr.banggood.com/custlink/v3DY...
* 1 x Brushless 30A ESC: https://s.click.aliexpress.com/e/_Dnc... OR
https://s.click.aliexpress.com/e/_Dek...
* 1 x 8060 propeller: https://s.click.aliexpress.com/e/_DCO... OR
https://tr.banggood.com/custlink/vvKR...
* 1 x LiPo Battery 11.1V 1000 mAh: https://s.click.aliexpress.com/e/_DEn...
OR 11.1V 1300 mAh: https://s.click.aliexpress.com/e/_Dd8...
* 4 x Micro Servo (MG90): https://s.click.aliexpress.com/e/_DCf... OR https://s.click.aliexpress.com/e/_DD1...
* Radio Control: https://s.click.aliexpress.com/e/_DCP... OR https://s.click.aliexpress.com/e/_DCP...
* Lipo Battery Charger: https://s.click.aliexpress.com/e/_DF5... OR
https://s.click.aliexpress.com/e/_Dlw... OR
https://www.banggood.com/custlink/vKm...

* ESUN PLA-LW filament: https://s.click.aliexpress.com/e/_DlN... OR https://s.click.aliexpress.com/e/_DmZ... OR https://s.click.aliexpress.com/e/_Dkf...

* Super CA Glue with Spray Adhesive Activator (like this): shorturl.at/cLZ27
OR https://s.click.aliexpress.com/e/_DD4...

Radiomaster TX16S Mark II: https://s.click.aliexpress.com/e/_DCZ...

Piper Cub 3D Files: https://3dlabprint.com/shop/piperj3cub/

Full flight video (No edit):    • 3DLabprint 3D Printed RC Piper Cub Fu...
Full flight video (hand lounch) (No edit):    • 3DLabprint 3D Printed RC Piper Cub Fu...

Thanks for watching. If you want to support, join this channel.
   / @kendin-yap

Technicial Specifications:
Wingspan: 1068 mm / 42.0 inch
Lenght: 675 mm / 26.6 inch
Height: 310 mm / 12.2 inch
Wing area: 18,15 dm2 / 1.94 square feet
Wing loading: 31 g/dm2 / 15.3 oz/square feet
Center of gravity: 44 mm / 1.73 inch from leading edge
Airfoil: LHK12 modified by 3DLabPrint
Print weight (LW PLA Painted): 270 gr / 9.52 oz
Takeoff weight (with 3s 1000 mAh lipo): 620 g / 21.87 oz
Required control system: 4 channels, 4 micro servos
Suitable battery (3S): 11.1V 1000Mah - 1100Mah Lipo battery
Suitable motor: 2212 Brushless Motor (900-1400KV)
Suitable propeller: 2 Blade 8x6 (8060)
Filament: LW-PLA (ESUN)

#rcairplane #diyairplane

All of my videos : https://bit.ly/2Z9QVYK
Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos.