LUXMAN CL-40
Топовый ламповый предварительный усилитель LUXMAN CL-40. Год выпуска аппарата 1983.
Каталожная стоимость аппарата на момент производства составляла 330,000 йен.
Спецификация:
Model Control tube amplifier
Output voltage (0.3% distortion) 2V rated up to 20V or more: pre out
Output Impedance Pre out, Rec out: 500Ω
THD (Rec out, 2V, 1kHz) less than 0.05%: Phono
(Pre out, 2V, 1kHz) less than 0.05%: Tuner, DAD, Line
(Pre out, 2V, 1kHz) or less Monitor1 / 2:0.05%
Frequency characteristic Phono: 20Hz ~ 20kHz ± 0.3dB
Tuner, DAD, Line: 1Hz ~ 50kHz ± 0.5dB
Monitor1 / 2:1 Hz ~ 50kHz ± 0.5dB
Input Sensitivity (1V output) Phono: 1.8V
Tuner, DAD, Line: 170mV
Monitor1 / 2:170 mV
Input impedance Phono: 50kΩ, (with selector switch) 100kΩ
Tuner, DAD, Line: 100kΩ
Monitor1 / 2:100 kΩ
Ratio S / N (input shorted, correction IHF-A) More than 75dB: Phono
Tuner, DAD, Line: 100dB or more
Over Monitor1 / 2:100 dB
Tone control LUX scheme NF type
Bass, Treble: ± 7dB maximum
Auxiliary equipment For low-pass filter (subsonic: 10Hz, low cut: 40Hz)
Monitor switch (tape-1, tape-2)
Tape dubbing switch (1-2,2-1)
Recording switch
Mode switch (reverse, stereo, mono)
Attenuator (-20dB)
Tone-in-switch
Jack and headphone amplifier output (8Ω: 40mW)
Input impedance selector switch for Phono (50kΩ, 100kΩ
Line phase sensor
Use vacuum tube Book 3: 7025/12AX7A
Book 2: 7028/6BK7B
Book 2: 7026/6CG7
Book 1: 7030/12AU7A
Book 1: 7032/12BH7A
Supply voltage AC100V, 50Hz/60Hz
Power consumption (Electrical Appliance and Material Control Law) 50W
Physical Dimensions 168 × height 470 × depth 402mm width
Weight 8.0kg
