How to train a 2023 Ford F150 to learn new TPMS sensors when you putting on winter tires?
#TrainNewTireSensor#FordF150TPMS
when you have new F150 and old winter tires with Ford TPMS installed, you will have to train F150 to learn new TPMS sensor manually. it is training NOT relearning.
on YouTube a lot of videos show how to relearn TPMS sensor. it will be easy just power on and 5 times 4 ways emergency light to start.....
but it will not work, if you just have the new truck and the Tom's sensor is new to it. you will have to manually train the truck with new sensors.
After you trained your truck, you will be able to set the truck to relearn when you rotate or change season tires.
With Push Button Start:
some models require the start button to be pressed 2x (w/o pressing the brake) to enter RUN mode(Ignition ON/Engine OFF). If that is the case modify steps 3 and 5 noted.
01-Engage parking brake and inflate all tires
02-With the vehicle OFF press and release the brake pedal
03-Push START button 5 times(Note: 8 times if 2x-to-RUN)
04-Press and release the brake pedal
05-Push START button 6 times(Note: 9times if 2x-to-RUN)
06-A single horn chirp will indicate the relearn mode is active
07- se tool to Activate LF sensor(let air out of tire will active the sensor as well)
08-Single horn sounds to indicate sensor learning successful
09-Repeat for RF/RR/LR tires
10-TRAINING MODE COMPLETE will display on message center when relearn is finished
TIP: Lowering driver's side windows may help to complete this process on larger vehicles.
With Standard Ignition:
01-Engage parking brake and inflate all tires
02-Turn ignition to OFF position
03-Press and release brake pedal
04-Quickly turn the ignition from OFF to RUN (engine OFF) three times (stop in RUN position)
05-Press and release brake pedal
06-Turn ignition OFF
07-Quickly turn the ignition from OFF to RUN (engine OFF) three times (stop in RUN position)
NOTE: All of the steps for this process must be performed within 10 seconds
08-A single horn chirp will indicate the relearn mode is active
09- se tool to Activate LF sensor(let air out of tire will active the sensor as well)
10-Single horn sounds to indicate sensor learning successful
11-Repeat for RF/RR/LR tires
12-TRAINING MODE COMPLETE will display on message center when relearn is finished
TIP: Lowering driver's side windows may help to complete this process on larger vehicles.
