CMMP M3 on Profinet + Bonus Synchronization Slave
This video is about using the FHPP Library on Siemens, specifically for a PROFINET configuration.
I included a brief explanation on how to set the synchronization operation using an external encoder, refer to the index below, you'll find it at the end of the video. This procedure will be similar in any platform since it's based on FHPP, i.e. Studio 5000 (Rockwell), Codesys, Siemens, etc.
Below you'll find the different steps with timestamps for easier navigation through the video.
(00:10) Overall explanation
(00:26) Starting new project in TIA Portal
(01:02) Downloading and installing the GSDML files
(02:07) Adding the CMMP drive to your network
(03:03) Downloading and installing the Function Blocks
(03:44) Adding the Function Blocks and Data Types
(05:49) Creating a project in Festo Configuration Tool
(10:38) Online access to the PROFINET devices
(10:55) Reassigning IP addresses to the PROFINET devices
(11:59) Adding the Function Blocks to the Main program
(15:01) Adding a Watch Table
(15:56) Download project
(16:49) Testing the project
(21:41) *BONUS* Setting synchronization with an external encoder
