Configuring RIP on Packet Tracer Step by Step | Dynamic Routing using RIP (CCNA) | RIP Tutorial

Опубликовано: 03 Январь 2025
на канале: Albert Subir Mondal

3,351

In this video I will show how to configure Dynamic Routing using RIP (Routing Information Protocol) on Cisco Packet Tracer.

RIP:

The Routing Information Protocol (RIP) uses broadcast UDP data packets to exchange routing information. Cisco software sends routing information updates every 30 seconds, which is termed advertising. If a device does not receive an update from another device for 180 seconds or more, the receiving device marks the routes served by the nonupdating device as unusable. If there is still no update after 240 seconds, the device removes all routing table entries for the nonupdating device.
A device that is running RIP can receive a default network via an update from another device that is running RIP, or the device can source the default network using RIP. In both cases, the default network is advertised through RIP to other RIP neighbors.

Related Videos:

1) CCNA: VLAN Configuration Bangla Tutorial (A-Z) | Switching basic concept and VLAN configuration in Bangla
Link:    • VLAN Configuration Bangla Tutorial (A...
2) Inter-VLAN Routing Bangla Tutorial | CCNA in Bangla Inter-VLAN Routing
Link:    • Inter-VLAN Routing Bangla Tutorial | ...
3) Cisco CCNA Static NAT Configuration on Packet Tracer Bangla Tutorial | Setup Static NAT on Cisco
Link:    • Cisco CCNA Static NAT Configuration o...
4) Cisco CCNA Dynamic NAT Configuration on Packet Tracer Bangla Tutorial | Setup Dynamic NAT on Cisco
Link:    • Cisco CCNA Dynamic NAT Configuration ...

5) NAT PAT Configuration Bangla Tutorial | Free Cisco Video Training on NAT and PAT | NAT and PAT
Link:    • NAT PAT Configuration Bangla Tutorial...

7) Static Routing Tutorial with Cisco Packet Tracer Bangla Tutorial | Static Routing using 3 Routers
Link:    • Static Routing Tutorial with Cisco Pa...

8) Configure Default Routes in Cisco Packet Tracer (CCNA)|CCNA Default Routing in Cisco Packet Tracer
Link:    • Configure Default Routes in Cisco Pac...

9) Cisco Router Telnet Configuration in Packet Tracer Step by Step | Enable Telnet on a Cisco Router
Link:    • Cisco Router Telnet Configuration in ...

IP Subnetting:

1) IP Subnetting in Bangla (Part - 01) | Subnetting Made Easy for Class C | CIDR 25 | IPv4 Subnetting
Link:    • IP Subnetting in Bangla (Part - 01) |...
2) IP Subnetting in Bangla (Part - 02) | Subnetting Made Easy for Class C | CIDR 26 | IPv4 Subnetting
Link:    • IP Subnetting in Bangla (Part - 02) |...
3) IP Subnetting in Bangla (Part - 03) | Subnetting Made Easy for Class C | CIDR 27 |IPv4 Subnetting
Link:    • IP Subnetting in Bangla (Part - 03) |...
4) IP Subnetting in Bangla (Part - 04) | Subnetting Made Easy for Class B | CIDR 17 | IPv4 Subnetting
Link:    • IP Subnetting in Bangla (Part - 04) |...
5) IP Subnetting in Bangla (Part - 05) | Subnetting Made Easy for Class B | CIDR 18 | IPv4 Subnetting
Link:    • IP Subnetting in Bangla (Part - 05) |...
6) IP Subnetting in Bangla (Part - 06) | Subnetting Made Easy for Class B | CIDR 19 | IPv4 Subnetting
Link:    • IP Subnetting in Bangla (Part - 06) |...

7) IP Subnetting in Bangla (Part - 07) | Subnetting Made Easy for Class A | CIDR 9 | IPv4 Subnetting
Link:    • IP Subnetting in Bangla (Part - 07) |...

8) IP Subnetting in Bangla (Part - 08) | Subnetting Made Easy for Class A | CIDR 10 | IPv4 Subnetting
Link:    • IP Subnetting in Bangla (Part - 08) |...

9) IP Subnetting in Bangla (Part - 09) | Subnetting Made Easy for Class A | CIDR 11 | IPv4 Subnetting
Link:    • IP Subnetting in Bangla (Part - 09) |...

IP Addressing:

Part-1:    • IP Addressing Bangla Tutorial Part-1 ...
Part-2:    • IP Addressing Bangla Tutorial Part-2 ...
Part-3:    • IP Addressing Bangla Tutorial Part-3 ...
Part-4:    • IP Addressing Bangla Tutorial Part-4 ...
Part-5:    • IP Addressing Bangla Tutorial Part-5 ...

Other Videos:
1) How to Connect Two Computers Via LAN Cable in Windows 10 and windows 7 Bangla Tutorial
Link:    • How to Connect Two Computers Via LAN ...
2) How to Share Files and Folders using IPv6 Address Bangla Tutorial-Windows 10/ windows 8.1/ Windows 7
Link:    • How to Share Files and Folders using ...

►Facebook Page :-   / albert-subir-mondal-115887392435466
►Google+ Page :- https://plus.google.com/communities/1...
►Twitter Page:-   / albertsubir
►YouTube Channel :-    / rimon19821983
►Website Link:- http://albertcse.blogspot.com/

Please Subscribe This Channel And Enjoy Our Latest Updates
Don't Forget to Like, Comment & Share

Please don't copy anyone our video we think every one like our video and we can gain our channel in a short time.