TP-Link XZ000-G3 GPON ONT - Teardown - UART Console Access

Опубликовано: 13 Октябрь 2024
на канале: Van Tech Corner

8,447

115

In this video, let's dig the XZ000-G3 GPON ONT by tearing it down, soldering the UART headers and let's see if we can find any interesting thing with this device.

UART login: admin/1234
Clear photos & more detail - https://vantc.net/all-about-the-tp-li...

00:00 - Introduction
00:42 - Teardown the XZ000-G3
04:19 - Closer look at the PCB components (EN751221 SoC)
06:29 - Solder the UART headers
06:40 - Connect the USB TTL Adapter to the UART headers
07:26 - Establish the UART Serial connection with Putty (admin/1234)
11:11 - Attempt to access hidden features (change SW, HW info, OCMI, etc.)
14:08 - Backup the firmware (Dump the mtd0)

Here is an overview of the specs that I got from the console:

System type: EcoNet EN751221 SOC
CPU Model: MIPS 34Kc V5.8
RAM: 64 MB

That is all for this video. Thanks for watching and see you in the next video!