Arduino Project to Product Part 4: Optimizing Operating Voltage – Maker.io Tutorial | Digi-Key

Опубликовано: 27 Октябрь 2024
на канале: DigiKey

12,293

103

In this video, Shawn Hymel continues the tutorial on operating voltage optimization using datasheet information and the physical characteristics of project components. Buck, boost and buck/boost regulators are discussed as well as how to run the Atmega 328P at lower voltages by reducing clock speed. Shawn explains brown out detection and uses the Digilent Analog Discovery 2 to analyze the final designs operating voltage.

Additional Resources:

Digi-Key Battery Life Calculator - https://www.digikey.com/en/resources/...

RELATED VIDEOS
Arduino Project to Product – Part 1 – How to Accurately Measure Current
https://www.digikey.com/en/maker/vide...

Arduino Project to Product – Part 2– How to Calculate Battery Life
https://www.digikey.be/en/maker/video...

Arduino Project to Product – Part 3 – How to Build an Arduino on a Breadboard
https://www.digikey.com/en/maker/vide...

Arduino Project to Product – Part 4 – Optimizing Operating Voltage
https://www.digikey.com/en/maker/vide...

Arduino Project to Product – Part 5 – Testing LoRa Range
https://www.digikey.com/en/maker/vide...

Arduino Project to Product – Part 6 – Choosing a Voltage Regulator
https://www.digikey.com/en/maker/vide...

Arduino Project to Product – Part 7 – How to Measure Small Currents
https://www.digikey.com/en/maker/vide...

Arduino Project to Product – Part 8 – How to Put Arduino to Sleep
https://www.digikey.com/en/maker/vide...

Maker.io - https://www.digikey.com/en/maker
Digi-Key’s Blog – TheCircuit https://www.digikey.com/en/blog
Connect with Digi-Key on Facebook / digikey.electronics
And follow us on Twitter / digikey