OpenWRT How To Build - OpenWRT make menuconfig. Beginners guide to OpenWRT Build system
https://StartupHakk.com/?v=4C-0cfyCmqE
If you need a router, we offer a kit router that we have hundreds sitting in the corner. These are practically free (only $20), and super easy to use. So I am going to add a link to them down below.
Kit router - $20 with free S/H https://www.ebay.com/itm/324595429835
How to build your own custom OpenWrt ROM
The OpenWrt build system. Whether you're working on embedded systems, building custom software, or just want to tinker with your router’s firmware, OpenWrt's build system is where it's at! If you’ve ever wanted to customize your router’s firmware, this is the perfect place to start. So, let’s get into the nuts and bolts of using the OpenWrt build system!
What exactly is the OpenWrt build system, and why should you care? Well, OpenWrt is an open-source firmware for routers and embedded devices that gives you complete control over your networking gear. But, if you want to do anything advanced—like building your own packages, adding custom features, or even creating a fully customized firmware image—you’ll need to understand the build system.
So today, we’re going to cover the basics of how to use the OpenWrt build system. Now, this isn’t just about downloading some pre-built firmware, slapping it on your router, and calling it a day. Nope, we’re talking about building everything from scratch! This will give you the flexibility to customize your firmware, choose the right packages, and even optimize performance. In short—you'll be turning your router into a beast!
Sound intimidating? Don’t worry—I’m here to walk you through every step. We’re going to download the build system, configure the toolchain, and finally, build your very own OpenWrt firmware. So stay tuned, grab your coffee, and let’s get started!
First, you’ll need a Linux environment—Ubuntu or any Debian-based distribution is perfect. You’ll also need a good amount of disk space and a solid internet connection, because we’re going to be pulling a lot of source code and building it.
If your company’s systems are a bit behind or you need help with building custom software solutions, let us know! Here at StartupHakk, our specialty is building custom software and connecting systems like a well-oiled machine. Head over to StartupHakk.com/Spencer, and let’s chat!
Step to build
Prepare build Env
Download the code
Add packages
Select the hardware
Make Menuconfig
Build the code
Get the firmware
Flash the router
https://openwrt.org/docs/guide-develo...
#openwrt #firmware #linux #coding #codingbootcamp #softwaredeveloper #CodeYourFuture
